Driveway Gate Installation

This post is from from my other blog here

Hey!? Who has been lurking on my site?  Dave!  Yes, we did start to install our gate this past weekend.  It is one of the final tasks in this very long project of getting this fence replaced.  We also set a few more posts in concrete.  We are just about ready to stretch the rest of the fence.

We looked at gates and boy are they expensive. Some are in the thousands of dollars. After looking around at gates we chose the Adjust-a-gate and it's a kit where you buy and put the metal frame together and add the wood and facing yourself.  My Dad got us an automatic gate opener too so we are just about set.

The hinges are really hefty and screwed into our 6" x 6" pressure treated posts.

We got the largest gate they make and that has three rails of 2" x 4" pressure treated boards.

It took a couple of hours to put together and get level.  We really needed a line level but couldn't find it of course.  So I made one using zip ties.  I love zip ties.

Here is the finished frame.

I think we are going to use the same green lattice that we are using for our arbors for the face of the gate for now.  It will match our arbors, be affordable and then later we can take it off and do something more fancy if we want.

For  now, we need to dig a trench for the power to the gate opener, install the gate opener, attach the lattice and level and pour concrete under the gate-so not this weekend but soon, soon we should have a gate and an enclosed yard.